Audio Technica Line + Gradient Microphone - AT8035

Audio Technica Line + Gradient Microphone - AT8035

Part Number: AT8035
Our Price: $269.00
This Item Is Discontinued
Free Shipping
This item qualifies for FREE GROUND SHIPPING! Contiguous U.S. only.

Description

Line + Gradient Condenser Microphone

The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.

Key Features
  • Designed for video production and broadcast (ENG/EFP) audio acquisition
  • Length is well-suited for ENG, outdoor recording and other specialized uses
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Excellent sound rejection from the sides and rear of mic
  • Switchable low-frequency roll-off
  • Operates on battery or phantom power
  • RoHS compliant-free from all substances specified in the EU directive on hazardous substances

Specifications

ELEMENTFixed-charge back plate, permanently polarized condenser
POLAR PATTERNLine + gradient
FREQUENCY RESPONSE40-20,000 Hz
LOW FREQUENCY ROLL-OFF80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITYPhantom: –38 dB (12.5 mV) re 1V at 1 Pa
Battery: –39 dB (11.2 mV) re 1V at 1 Pa
IMPEDANCEPhantom: 250 ohms
Battery: 300 ohms
MAXIMUM INPUT SOUND LEVELPhantom: 132 dB SPL, 1 kHz at 1% T.H.D.
Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)Phantom: 110 dB, 1 kHz at Max SPL
Battery: 98 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO72 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS11-52V DC, 2 mA typical
BATTERY TYPE1.5V AA/UM3
BATTERY CURRENT / LIFE0.4 mA / 1200 hours typical
(alkaline)
SWITCHFlat, roll-off
WEIGHT170 g (6.0 oz)
DIMENSIONS369.0 mm (14.53") long,
21.0 mm (0.83") diameter
OUTPUT CONNECTORIntegral 3-pin XLRM-type
ACCESSORIES FURNISHEDAT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case
AUDIO-TECHNICA CASE STYLESG1

Reviews