Home / Audio Technica / Audio Technica X/Y Stereo Microphone - BP4025

Audio Technica X/Y Stereo Microphone - BP4025

This item qualifies for FREE GROUND SHIPPING! Contiguous U.S. only.

Description

X/Y Stereo Field Recording Microphone

Designed for broadcast and professional recording, Audio-Technica's BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

Key Features

Large-diaphragm capsules offer pristine sound quality and exceptionally low noise
Innovative coincident capsule configuration produces accurate stereo image in smaller housing
Compact, lightweight design is ideal for camera-mount use
Excellent channel separation
Phantom power operation-for use with professional equipment
Switchable low-frequency roll-off and 10 dB pad
Includes one balanced cable (two 3-pin XLRM-type connectors at output)
RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

Specifications

ELEMENT	Fixed-charge back plate permanently polarized condenser
POLAR PATTERN	X/Y Stereo
FREQUENCY RESPONSE	20-17,000 Hz
LOW FREQUENCY ROLL-OFF	80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY	-32 dB (25.1 mV) re 1V at 1 Pa
CHANNEL BALANCE	<2.5 dB
IMPEDANCE	170 ohms
MAXIMUM INPUT SOUND LEVEL	145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
DYNAMIC RANGE (typical)	131 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	80 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 7 mA typical (both channels total)
SWITCH	Flat, roll-off; 10 dB pad (nominal)
WEIGHT	269 g (9.5 oz)
DIMENSIONS	186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameter
OUTPUT CONNECTOR	Integral 5-pin XLRM-type
CABLE	5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
ACCESSORIES FURNISHED	AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch
AUDIO-TECHNICA CASE STYLE	S12

Reviews

Write a Review