Blizzard Lighting TOURnado IP EXA

12x 15W 6-in-1 RGBAW+UV LEDs, IP65

The Tournado™ IP EXA is one tough fixture featuring super bright RGBAW+UV color mixing thanks to its installed 12x 15W 6-in-1 LEDs with advanced 25° optics. Since each individual LED incorporates a red, green, blue, amber, white, and UV chip behind a single lens, shadow artifacts and unevenness within the field are things of the past!

Like its TOURnado™ brothers, the TOURnado™ IP EXA sports a convection cooled cast aluminum housing with a tempered glass lens, watertight internal gaskets, and weatherproof power and data cable in/out connections. Users can run any of its impressive built-in programs individually or all together in auto run mode with speed control, fade, and flash settings, then even perform full RGBAW+UV color mixing either with or without DMX control.

• RGBAW+UV color mixing via 12x 15W RGBAW+UV 6-in-1 LEDs
• LED control panel with 4 touch sensitive electronic buttons
• 25° beam angle
• Variable electronic dimming & strobe
• Built-in color & chase macros via DMX
• Built-in automated programs via master/slave
• RGBAW+UV color mixing ability in standalone mode
• 4/5/6/7/9/12-channel DMX w/ 32-bit dimming
• Rugged and well-built (It hits the gym regularly)
• Convection cooled cast aluminum housing
• Dual mounting brackets for positioning flexibility
• Flicker-free constant-current 500MA LED driver
• IP rated locking power and 3-pin DMX connections

• Light source: 12x 15W 6-in-1 LEDs 100,000 hours
• 25° beam angle
• Luminous Intensity: 13,700 Lux @ 1m, 3,900 Lux @ 2m

• Width: 10.7 inches (27 cm)
• Depth: 5.7 inches (14.4 cm)
• Height: 8.6 inches (21.8 cm), 11.2 inches (28.4 cm) including bracket height
• Weight: 11.5 lbs (5.2 kg)

• Protocol: USITT DMX-512
• DMX Channels: 4/5/6/7/9/12
• Input: 3-pin XLR Male
• Output: 3-pin XLR Female
• Operating Modes: Standalone, Master/Slave, Color Preset

• Operating Voltage: 100V-264V/47-63HZ
• Power Consumption: 100W, 1.35A, PF: .6

• 2-year limited warranty, does not cover malfunction caused by damage to LEDs